HomeSaver FireplaceFlex

Stainless Steel Chimney Liner


FireplaceFlex for 8" X 12" and 12" x 12" Flues

There's just as big a need for fireplace relines as there is for other types of relines.  All you have to do is look for  fireplace chimney liner damage - you'll find it.  And HomeSaver FireplaceFlex and Dial-A-Flex give you all the materials you need to do the job.

HomeSaver FireplaceFlex is available in 304 and 316-alloy stainless, in sizes to fit your two most common fireplace flue families: 12"x 12" and 8"x 12" .  These two sizes will be custom made to your specific length and shipped direct from HomeSaver's manufacturing plant.  There is a 10' minimum - see HomeSaver Flex Custom Lengths.

  • 8" x 12" FireplaceFlex has inside dimensions of 7 1/4" x 11 1/4", outside dimensions are 1/4" larger (7 1/2" x 11 1/2").  Cross-sectional area is 81.6
  • 12" x 12" FireplaceFlex has inside dimensions of 10 1/4" x 10 1/4", outside dimensions are 1/4" larger (10 1/2"x 10 1/2"). Cross-sectional area is 105.1

To finish the job at the top, simply order an 18-ga. custom top/bottom plate, below.  You'll also need a set of our top/bottom support brackets (below).

Be sure the flex protrudes no more than 3" above top plate for use with chimney caps.

FireplaceFlex Pipe (SPECIAL ORDER -prices are by the foot; quantity of 1 equals 1 foot.) 

Note: There is a 10 ft. minimum order.

Shipping will calculate after order is processed and we will notify you of shipping charges prior to shipping.

Click Here for Installation Instructions