Napoleon products are on backorder until December.  If you are interested in prepurchasing a Napoleon product we will ship it as soon as they are back in stock.

The easy operation of a single lever burn control regulates primary and secondary air establishing a perfect mixture and providing a clean burn.

• EPA approved to Phase 2 of the 1990 test Standards and below Washington's DEQ Phase 3 with emissions as low as 3.7 grams per hour.
• Economical 6" flue assures you of efficiency and cost saving installations.
• Secondary air tube insulated with ceramic fiber and protected with a stainless steel cover plate ensures complete combustion.
• Upper firebox lined with ceramic fiber baffles. The advantage of light weight ceramic is three fold:
  1. Ease of installation: only two pieces.
  2. Lighter, easier to handle.
  3. The thermal dynamics of ceramic fiber allows for quicker startup and a hotter, cleaner burn.
• Non-catalytic high tech design eliminates the need for a delicate ceramic catalytic combustor which can deteriorate over time. 
• Thermostatic heat sensors are now available for EPA stoves, automatically turning the blower on and off as the unit is heated and cooled.
• Large viewing area -- air wash in combination with high temperatures keeps the viewing glass clean.
• Traditional painted black finish.
• President's Limited Lifetime Warranty.

Product Note: Leg units include rear shield with hot air circulation deflector.

Specifications For EPA Steel Woodstove
Emissions (grams per hour)	3.7
Width x height x depth  (inches)	25 1/2 x 33 1/4 x 27
Firebox chamber (D.W.H.) (inches)	18 x 18 x 12
Firebox capacity	2.25 cu. ft.
Door size (height x width)	14 3/4 x 19 3/8
Weight without bricks	250 lbs.
Weight of bricks	145 lbs.
Approximate area heated*	1000 - 2000 sq. ft.
Heat output BTU/h**	11,400 - 41,300
Heat output BTU/h (high burn)***	70,000 Btu
Burn time (low fire)*	9 hours
Catalytic combustor	no
R-2000 approved (Canada)	yes
Max. log size	18"
Flue diameter	6"
Flue size-prefabricated	6"
Minimum Clearances With Single Wall Chimney Connector From Stove To Combustibles
Rear	12"
Side	12"
Corner	6"
Minimum Clearances With Approved Double Wall Pipe From Stove To Combustibles
Rear	6"
Side	10"
Corner	4"

CERTIFIED FOR EMISSIONS TO EPA PHASE 2 1990
STANDARDS AND SAFETY TESTED TO NORTH AMERICAN STANDARDS.

*Figures may vary with individual conditions.
**EPA (Environmental Protection Agency) rated BTU/HR with softwood test fuel (for emissions testing only) - no refueling
***Wolf Steel Ltd. own test results showing realistic BTU using hardwood logs with regular refueling. Heat output will differ depending on chimney draft as well as type, moisture content, and size of wood.

All stove clearances may be reduced with shielding acceptable to local authorities.

This insert includes a cast-iron gold plated door, ornamental gold plated cast-iron legs, gold plated louvers, blower kit with variable speed control, and an ash pan kit assembly. 

WE DO NOT ACCEPT RETURNS ON WOODBURNING STOVES.  PLEASE MAKE CERTAIN OF ALL CLEARNACES AND SPECIFICATIONS PRIOR TO ORDERING.

FREE SHIPPING within the continental U.S. (Includes lift gate service)